AEM Engine Management Tuning

Home/AEM Engine Management Tuning

AEM Engine Management

EngineLogics is a factory trained on AEM engine management systems and has  installed and tuned AEM ecu’s in many high horse power applications such as Honda, Mitsubishi, Supra’s, MR2, Scion, Subaru, and others.

 

AEM’s Series 2 Programmable Engine Management System (EMS)

A complete engine control system that plugs into the factory harness and uses the factory sensors. AEM’s Series 2 Programmable Engine Management System (EMS) is more powerful than its predecessor.

AEM Series 2 Plug and Play

AEM Series 2 Plug and Play

Plugs directly into the factory harness. No rewiring necessary.
Tune using new USB communication port or serial port.
New smaller enclosure for reduced physical size.
1MB of internal data logging.
Up to 12 peak and hold injector drivers.
Up to 8 direct-fire coil outputs.
Up to 8 direct-fire coil outputs.
Works with all AEM gauges.

 

EMS-4 Universal standalone engine management system

AEM’s EMS-4 Universal Standalone Engine Management System is designed for use on modified Powersports and four-cylinder race car applications. With its weather/shock proof enclosure and specially designed 36-pin connector, the EMS-4 is equipped to operate in harsh environments and can be mounted anywhere.

EMS-4 Universal standalone engine management system

EMS-4 Universal standalone engine management system

4 Saturated Injector Drivers
4 Coil Triggers
8 General Purpose Inputs/Outputs
Mag or Hall Cam and Crank Inputs
O2 Input
Knock Input
8 MB Internal Data Logger
CAN Data Stream
Utilizes AEMTuner Interface Software

Fuel/Ignition Controller (F/IC)

AEM FIC (Fuel/Ignition Controller)

AEM FIC (Fuel/Ignition Controller)

AEM Fuel / Ignition Controller (F /IC)PC-programmable piggy-back controller that allows users to retard timing and add fuel to virtually any engine, even on variable cam timing engines (VTEC, iVTEC, VVTi, MiVEC, etc.).

Works with latest OBD-II race vehicles including a High-Side output based on Engine RPM.
Six (4-to-8) injector inputs with simulated injector load used when remapping OEM injectors Analog in / out for remapping / clamping MAF

If you are looking for a qualified AEM engine management tuner, EngineLogics is your the tuning shop to go too.